Description
The GO Anywhere Plus Trailer Power Harness provides a direct connection between the GO Anywhere Plus and compatible North American trailer power supplies. Designed for trailers with SAE J560 connections, this 63-inch (160 cm) harness provides a practical power connection for GO Anywhere Plus installations.
Highlights
- Designed for North American trailers
- Compatible with SAE J560 trailer connections
- Connects the GO Anywhere Plus to a trailer power supply
- Flying leads with 6-pin Chogori connector
- 63-inch / 160 cm harness length
- Supports connected cables up to 5.6 feet / 1.7 m
- Designed specifically for the GO Anywhere Plus
Designed for North American Trailers
The HRN-GA2NATRL is designed to connect the GO Anywhere Plus to a North American trailer power supply using an SAE J560 trailer connection. It provides the necessary wiring between the trailer power source and the GO Anywhere Plus device.
SAE J560 Compatibility
This trailer power harness is designed for applications using SAE J560 trailer connections, making it suitable for compatible trailers equipped with this standard connection.
The harness uses flying leads that terminate in a 6-pin Chogori connector for connection to the GO Anywhere Plus.
Flexible Installation
With a 63-inch (160 cm) length, the HRN-GA2NATRL provides flexibility for routing the connection between the trailer power supply and the GO Anywhere Plus. Connected cables should not exceed the maximum specified length of 5.6 feet (1.7 m).
Professional installation is recommended to ensure the GO Anywhere Plus and its harness are installed securely and correctly. The external power harness must be connected to an appropriately fused circuit to help prevent overcurrent conditions and potential damage to the trailer’s electrical system. Geotab’s installation guidance also recommends that installation be performed by a Certified Geotab Installer or equivalent.
Trailer Power Harness Support Document can be found here. Please contact us if you have any questions.
Frequently asked questions
What is the GO Anywhere Plus Trailer Power Harness?
The GO Anywhere Plus Trailer Power Harness (HRN-GA2NATRL) connects the GO Anywhere Plus to a compatible North American trailer power supply.
What is the HRN-GA2NATRL used for?
The HRN-GA2NATRL is used to connect the GO Anywhere Plus to trailers equipped with an SAE J560 trailer connection.
Is the HRN-GA2NATRL compatible with the GO Anywhere Plus?
Yes. The HRN-GA2NATRL is designed specifically for the Geotab GO Anywhere Plus.
What type of trailers is this harness designed for?
The harness is designed for compatible North American trailers that use an SAE J560 power connection.
What is an SAE J560 connection?
SAE J560 is a standardized electrical connection used for trailer applications in North America. The HRN-GA2NATRL is designed to support GO Anywhere Plus installations using this type of trailer connection.
What type of connector does the harness use?
The harness uses flying leads connected to a 6-pin Chogori connector for connection to the GO Anywhere Plus.
How long is the GO Anywhere Plus Trailer Power Harness?
The HRN-GA2NATRL is 63 inches (160 cm) long.
What is the maximum length of connected cables?
The maximum length of connected cables is 5.6 feet (1.7 meters).
Does the trailer power harness require professional installation?
Professional installation is recommended. Geotab states that GO Anywhere Plus installation requires sufficient technical knowledge and expertise, such as that of a Certified Geotab Installer or equivalent.
Does the HRN-GA2NATRL require a fused power connection?
Yes. Geotab warns that a trailer power harness must be connected to an appropriately fused circuit to reduce the risk of overcurrent, electrical-system damage, or fire.
Can this harness be used with a North American trailer power supply?
Yes. The HRN-GA2NATRL is specifically designed to connect the GO Anywhere Plus to a North American trailer power supply through an applicable SAE J560 connection.
