Geotab Adapter installation – Heavy Duty Vehicle Installation

For heavy duty vehicles equipped with 9 pin OBDII port, the 9 pin OBD II T-harness is simple to install and can be used to place the GO device in a more optimal location and frees up the OBDII port.

Universal 9-pin (OBD II) Straight Extension harness:

  • For older vehicles equipped with 6 pin OBDII port, Geotab also offers 6 pin harness. Installation steps are identical to the 9 pin extension harness posted above.

Geotab 6 pin harness

Please click on the link for further details OBD II T-harness installation

Heavy Duty Vehicle Installation – Universal 9-pin (OBD II ) T-harness:

9 pin complete setup

Complete Setup

9 pin t-harness

 

 

Universal 9 pin OBDII T-Harness Kit for the GO device

For heavy duty vehicles equipped with 9 pin OBDII port, the 9 pin OBD II T-harness is easy to install and can be used to place the Geotab GO device in a more optimal position and frees up the OBDII port. Here are the instructions showing you how to install the T-Harness. 9 Pin OBD II T-harness installation

After the device is plugged in, it may take a short drive (5 minutes, above 15km/h) for the GPS to register it’s location properly.

After this short drive, all of the status lights should stay on until you turn off the vehicle.

0